Shipping Auto Parts from Singapore to Dallas-Fort Worth via Ocean Freight

For moisture-sensitive automotive parts, select inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You may ship vehicle tires with boxed car parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed auto parts pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts via ocean freight, it is important to ensure that the parts are securely packaged to prevent damage during transit. Additionally, special handling may be required for sensitive components, such as electronics or parts that are prone to corrosion. Proper labeling and documentation are also essential to facilitate customs clearance.

Shipping auto parts from Singapore to the United States requires compliance with U.S. Customs and Border Protection regulations, including the submission of import declarations and adherence to safety standards set by the National Highway Traffic Safety Administration (NHTSA). Additionally, all shipments must comply with the Harmonized Tariff Schedule for accurate duty assessment.

DNA uses SAMMIE’s AI-driven rate and route optimization to recommend optimal carriers and lanes based on current conditions and prices.

Yes, DNA includes consolidation and customs pre-clearance to help move your air cargo quickly and compliantly.

DNA provides in-house customs brokerage including import/export clearance, tariff classification and valuation, ISF, AMS, and ACE filings, plus FDA, USDA, and multi-agency support.