Shipping Vehicle Components from Suape to Nashville via Ocean Freight

For moisture-sensitive car parts, Use inner Moisture-barrier bags around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You are allowed to ship Tires with boxed Auto parts, but They should be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers May require Hazardous materials declarations, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules Are best shipped with Full-value cargo insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed vehicle components pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and Tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Auto parts should be securely packaged to prevent damage during transit. Special attention must be given to sensitive components that may require specific temperature or humidity controls. Additionally, it is advisable to check for any specific handling instructions related to hazardous materials if applicable.

Shipments of auto parts from Brazil to the United States must comply with U.S. Customs and Border Protection regulations. Documentation such as a commercial invoice, packing list, and any necessary certificates of origin or compliance with U.S. safety standards is required. Import duties and tariffs may also apply, and it is essential to ensure that all parts meet relevant U.S. regulations.

Shippers can join the “One Test Run Challenge” by giving us a single shipment, which we use to demonstrate what visibility, reliability, and real partnership feel like, with a dedicated page available to get started.

Access to SAMMIE comes with every ocean, air, land, and customs service at no extra cost.

Our team leverages SAMMIE’s AI-driven rate and route optimization to recommend optimal carriers and lanes based on current conditions and prices.