Shipping Car Tires from Surabaya to Mira Loma via Ocean Freight

For moisture-sensitive Auto parts, select inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed car parts, but it is best that they are physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. Shippers should review whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Documentation typically includes a commercial invoice, packing list, bill of lading, and any necessary export permits from Indonesia, as well as import documentation required by U.S. customs.

Yes, shipments must comply with U.S. customs regulations, including adherence to the Federal Motor Vehicle Safety Standards (FMVSS) for automotive parts, and may require additional certifications or inspections depending on the specific parts being shipped.

Yes, DNA is fully licensed, bonded, and compliant with U.S. and international freight regulations as a Freight Forwarder, with credentials including Freight Forwarder & NVOCC License 019344, USDOT 3458744, MC-1128283, FMC Bond 91385, and C-TPAT Certification 24009050.

Yes, SAMMIE uses trained AI models to match documents, verify charges, and identify anomalies such as duplicate invoices, unmatched line items, or missing customs paperwork.

Transit times vary on lane, mode, and carrier, but SAMMIE provides up-to-date, predictive ETAs that factor in real-world conditions like port congestion and weather delays.