Shipping Vehicle Parts from Surabaya to Nhava Sheva via Ocean Freight

For moisture-sensitive automotive parts, Use inner poly bags with desiccant around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed automotive parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require dangerous goods documentation, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with declared value coverage. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and car tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Auto parts should be securely packaged to prevent damage during ocean transit. Special attention should be given to delicate components, which may require additional cushioning. It's also important to ensure that the packaging is moisture-resistant due to potential exposure to humidity during the journey.

Exporters must comply with both Indonesian and Indian customs regulations, which include obtaining necessary export permits from Indonesia and ensuring that all documentation, such as invoices and packing lists, is accurate. Additionally, auto parts may be subject to specific tariffs and import duties upon arrival in India.

David believes the best work happens quietly when everything runs smoothly and no one’s watching, and he applies that mindset to logistics and to life.

Our DNA Expert ETA provides an arrival estimate that is more accurate and proactive than carrier estimates, powered by SAMMIE’s data and human verification.

This value means that whether you are our smallest shipper or largest enterprise, you receive the same honesty, responsiveness, and care that define DNA Supply Chain Solutions.