Shipping Automotive Parts from Taipei to Istanbul via Ocean Freight

For moisture-sensitive Auto parts, select inner Moisture-barrier bags around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed Auto parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require Hazardous materials declarations, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with Full-value cargo insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and Tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

When shipping auto parts via ocean freight, it is crucial to ensure that all parts are properly packaged to prevent damage during transit. Considerations include using anti-corrosive materials for metal parts, securing loose components, and ensuring compliance with international shipping standards to avoid delays.

Required documentation typically includes a commercial invoice, packing list, bill of lading, and any necessary import/export permits. It is important to ensure that all documentation accurately reflects the nature of the goods and complies with both Taiwanese and Turkish customs regulations.

We are fully compliant with CBP, TSA, IATA, and NMFTA standards to ensure secure, lawful, and efficient cross-border operations.

Yes, for CE North America, where we built a custom EDI feed that pushes real-time shipment updates, documentation, and exception alerts directly into their ERP, eliminating dozens of manual tasks and improving cross-department visibility.

Yes, we can full port-to-door service, managing booking, loading, customs clearance, and final-mile delivery with one point of contact and one visibility platform.