Shipping Auto Parts from Taipei to Port Klang via Ocean Freight

For moisture-sensitive Auto parts, choose inner Moisture-barrier bags around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship car tires with boxed Auto parts, but They should be physically separated and properly secured. Most carriers recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers can require Hazardous materials declarations, depending on the type and quantity of fluid. You should review whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules are typically shipped with Full-value cargo insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized auto parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and Tires above. Use Corner boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Required documentation includes a commercial invoice, packing list, bill of lading, and any necessary export permits from Taiwan. Customs declarations must also comply with Malaysian regulations, which may require additional certifications depending on the auto parts being shipped.

Yes, auto parts should be securely packaged to prevent damage during transit. Consideration should be given to the weight and size of the parts, as well as any specific handling instructions related to sensitive components. Proper labeling is also essential to facilitate customs clearance at Port Klang.

Most platforms only show carrier data, while SAMMIE is built on ecosystem data from third-party sources and DNA’s proprietary history, enabling predictive ETAs, intelligent alerts, and advanced automation powered by clean, validated data.

We offer international shipping by ocean (FCL and LCL), air (standard and expedited), and domestic or cross-border ground freight (FTL, LTL, and intermodal).

Absolutely, you can access all documents—bills of lading, invoices, customs forms, and arrival notices—in SAMMIE’s centralized, searchable document hub.