Shipping Car Parts from Taipei to Seattle via Ocean Freight

For moisture-sensitive car parts, choose inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You are allowed to ship car tires with boxed car parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers can require special handling notes, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules are typically shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed vehicle components pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

The documentation required includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance with U.S. regulations.

Yes, auto parts must comply with U.S. safety and environmental regulations, including adherence to the Federal Motor Vehicle Safety Standards (FMVSS) and any applicable tariffs or import duties.

Yes, customers need an account. We walk you through onboarding to customize your experience and give you full access to the SAMMIE visibility platform.

Yes, our company is fully licensed, bonded, and compliant with U.S. and international freight regulations as a Freight Forwarder, with credentials including Freight Forwarder & NVOCC License 019344, USDOT 3458744, MC-1128283, FMC Bond 91385, and C-TPAT Certification 24009050.

Yes, the system relies on AI to match documents, verify charges, and identify anomalies such as duplicate invoices, unmatched line items, or missing customs paperwork.