Shipping Auto Parts from Tanjung Pelepas to Charleston via Ocean Freight

For moisture-sensitive automotive parts, Use inner Moisture-barrier bags around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, assess adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed Auto parts, but They should be physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require Hazardous materials declarations, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with Full-value cargo insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and Tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

When shipping auto parts via ocean freight, it is crucial to ensure that all parts are properly secured and packaged to prevent damage during transit. Special attention should be given to sensitive components, which may require additional cushioning and moisture protection. Additionally, compliance with international shipping regulations is necessary to avoid delays.

Required documentation includes the commercial invoice, packing list, and bill of lading. Additionally, a certificate of origin may be necessary, along with any specific import permits required by U.S. customs for automotive parts. It is essential to ensure that all documentation is accurately completed to facilitate smooth customs clearance.

Yes, DNA includes consolidation and customs pre-clearance to help move your air cargo quickly and compliantly.

DNA provides in-house customs brokerage including import/export clearance, tariff classification and valuation, ISF, AMS, and ACE filings, plus FDA, USDA, and multi-agency support.

Yes, DNA provides B2B pick/pack and palletization services.