Shipping Tires from Tanjung Pelepas to Columbus via Ocean Freight

For moisture-sensitive automotive parts, choose inner poly bags with desiccant around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with strong packing tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship car tires with boxed automotive parts, but it is best that they are physically separated and properly secured. Logistics providers commonly recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers can require dangerous goods documentation, depending on the type and quantity of fluid. Shippers should verify whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules are typically shipped with declared value coverage. Carrier default liability is usually limited and may not cover the full replacement cost of specialized vehicle parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed auto parts pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and car tires above. Use edge protectors, shrink wrap and bands to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

The required documentation includes a commercial invoice, packing list, and a bill of lading. Additionally, an import permit may be necessary for specific automotive parts, and compliance with U.S. Customs and Border Protection regulations is required.

Yes, auto parts should be properly packaged to prevent damage during transit. It is essential to ensure that all parts are securely stowed in containers, and any hazardous materials must be clearly labeled and comply with international shipping regulations.

DNA works with U.S. Customs & Border Protection (CBP), the FDA, USDA, DOT, and other regulatory bodies, and we maintain active certifications including C-TPAT and FMC.

Yes, we do provide coverage for urgent cases, which are escalated and managed with after-hours monitoring when needed, especially for high-volume or time-critical shipments.

DNA adheres to industry best practices and relevant data protection regulations for international shipping and technology platforms, including GDPR and CCPA where applicable.