Shipping Tires from Teoloyucan to Newark via Ocean Freight

For moisture-sensitive Auto parts, Use inner sealed pouches around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with strong packing tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed car parts, but They should be physically separated and properly secured. Logistics providers commonly recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. You should verify whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized vehicle parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use Corner boards, shrink wrap and bands to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

The documentation typically required includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance with U.S. regulations. Additionally, importers must ensure that goods meet U.S. customs regulations and may need to provide proof of payment of duties and taxes.

Yes, when shipping auto parts, it is crucial to ensure that items are properly packed to prevent damage during transit. This may include using cushioning materials and securing parts to prevent movement. Additionally, certain auto parts may have specific regulatory requirements regarding hazardous materials or emissions, which must be addressed to comply with shipping regulations between Mexico and the United States.

We provide ground transportation including full truckload (FTL), less-than-truckload (LTL), and drayage services, with U.S. and Mexico cross-border coverage, scalable capacity, GPS tracking, and digital documentation.

Yes, we provide tariff classification and valuation as part of our in-house expertise.

We operate partnered facilities in key logistics hubs, including locations near important ports for strategic storage and fulfillment.