Shipping Automotives from Tokyo to Dallas-Fort Worth via Ocean Freight

For moisture-sensitive automotive parts, choose inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You may ship car tires with boxed car parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers can require special handling notes, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules are typically shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

When shipping auto parts via ocean freight from Tokyo to Dallas-Fort Worth, it is important to ensure that the parts are properly packaged to prevent damage during transit. Additionally, certain auto parts may require specific handling due to their weight or fragility, necessitating the use of appropriate containers or pallets.

Regulatory requirements for shipping auto parts from Japan to the United States include compliance with U.S. Customs and Border Protection regulations, which may involve providing detailed documentation such as invoices, packing lists, and certificates of origin. Importers must also ensure that the auto parts meet U.S. safety and environmental standards, which may require additional certifications.

Yes, DNA offers tariff classification and valuation as part of our in-house expertise.

DNA utilizes partnered facilities in key logistics hubs, including locations near important ports for strategic storage and fulfillment.

You’re invited to take the DNA “One Test Run Challenge” with a single shipment so we can demonstrate our visibility, reliability, and partnership-focused approach.