Shipping Car Tires from Tokyo to New York via Ocean Freight

For moisture-sensitive automotive parts, Use inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed car parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Shipping auto parts from Tokyo to New York requires proper documentation including a commercial invoice, packing list, and a bill of lading. Additionally, customs declarations must be submitted, including any necessary import permits or certificates specific to automotive parts.

Yes, auto parts imported into the United States from Japan must comply with U.S. Customs and Border Protection regulations, including adherence to safety and environmental standards set by the Environmental Protection Agency (EPA) and the Department of Transportation (DOT). Proper labeling and compliance with import quotas may also be necessary.

SAMMIE serves as a smart platform built with AI and powered by clean, structured data that provides real-time tracking, proactive insights, and full control from port to delivery.

SAMMIE’s Smart Route Planning feature uses AI to hunt for the best carrier, lane, and timing in real time, optimizing for cost, speed, and reliability.

The platform helps project-based ocean freight teams by allows teams to quickly and efficiently update their customers regarding project-based ocean freight shipments and provides the tools needed to deliver the customer service their clients expect.