Shipping Car Tires from Valencia to Buenos Aires via Ocean Freight

For moisture-sensitive Auto parts, choose inner poly bags with desiccant around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with strong packing tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship car tires with boxed automotive parts, but They should be physically separated and properly secured. Logistics providers commonly recommend palletizing boxed car parts and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers can require dangerous goods documentation, depending on the type and quantity of fluid. You should verify whether the product is classified as dangerous goods under relevant transport regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules are typically shipped with declared value coverage. Carrier default liability Is often limited and may not cover the full replacement cost of specialized vehicle parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and car tires above. Use Corner boards, shrink wrap and bands to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Shipping auto parts from Valencia to Buenos Aires requires specific documentation including a commercial invoice, packing list, bill of lading, and customs declaration. Additionally, import permits may be needed for certain automotive parts, and it is essential to comply with Argentina's regulatory requirements for vehicle parts.

Yes, seasonal considerations can affect ocean freight for auto parts from Valencia to Buenos Aires. During peak shipping seasons, such as summer and the holiday period, port congestion may occur, which could impact loading and unloading times. Additionally, weather conditions in the Atlantic Ocean can also influence shipping routes and safety.

No, we use in-house customs brokerage with automation to reduce errors and accelerate clearance, rather than outsourcing to third-party brokers with outdated, manual documentation processes.

The “One Test Run Challenge” is an invitation to move a single shipment with DNA so we can demonstrate our visibility, reliability, and partnership, showing how our SAMMIE platform and proactive team perform in a real-world test.

Yes, you can. You don’t have to move your whole operation; you can give us one shipment in any mode or lane as a “test run,” and we’ll handle it end-to-end with precision, transparency, and care.