Shipping Car Tires from Valencia to Minneapolis via Ocean Freight

For moisture-sensitive Auto parts, choose inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, assess adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship car tires with boxed car parts, but it is best that they are physically separated and properly secured. Most carriers recommend palletizing boxed auto components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers can require special handling notes, depending on the type and quantity of fluid. Shippers should review whether the product is classified as dangerous goods under IMDG and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules are typically shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized auto parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed Automotive pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

The required documentation typically includes a commercial invoice, packing list, bill of lading, and any necessary customs declarations. Additionally, compliance with U.S. import regulations for automotive parts, such as EPA and DOT certification, may be required.

Yes, auto parts should be properly packaged to prevent damage during transit. It is important to ensure that sensitive components are secured and protected from moisture, as ocean freight exposes shipments to humidity and potential water ingress.

SAMMIE improves visibility by combining live carrier data, independent port tracking, an AI rules engine, and human verification to provide real-time visibility, predictive alerts, and exception management.

It means every move we make by land, air, or sea is guided by purpose, careful planning, decisive action, and precise, attentive execution.

You can hear more by listening to podcast episodes such as “David Rosendorf – Turning Setbacks Into Success” on The Rich Equation Podcast and “We Talk with Shipping & Logistics Magician David Rosendorf of DNA Supply Chain Solutions” on The Launch Pad Podcast.