Shipping Car Tires from Valencia to Navegantes via Ocean Freight

For moisture-sensitive Auto parts, Use inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed car parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

The documentation typically required includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance with Brazilian regulations.

Yes, shipments must comply with Brazilian customs regulations, which may include specific import permits for automotive parts, adherence to local standards, and potential tariffs that apply to imported goods.

Yes, support is available for urgent cases, which are escalated and managed with after-hours monitoring when needed, especially for high-volume or time-critical shipments.

We follow industry best practices and relevant data protection regulations for international shipping and technology platforms, including GDPR and CCPA where applicable.

What sets SAMMIE apart is its proprietary ecosystem of standardized shipping data that is meticulously cleaned, weighted, and validated from trusted third-party sources and DNA Supply Chain Solutions’ own operational history, enabling AI tools that think ahead instead of just reporting past events.