Shipping Vehicle Tires from Vitoria to Dallas-Fort Worth via Ocean Freight

For moisture-sensitive car parts, Use inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, assess adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You are allowed to ship Tires with boxed car parts, but they must be physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed vehicle components pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Shipping auto parts requires a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance with U.S. regulations. Additionally, customs declarations must be completed for both Brazilian exports and U.S. imports.

Yes, auto parts should be properly packaged to prevent damage during transit. It is also important to ensure that the parts comply with U.S. import regulations, which may include specific labeling and handling instructions to facilitate customs clearance upon arrival in Dallas-Fort Worth.

Our ground transportation solutions include U.S. and Mexico cross-border coverage.

Our brokerage team supports ISF, AMS, and ACE filings for your shipments.

Our logistics solutions are tailored for omnichannel retail, technology and electronics, automotive parts and machinery, manufacturing and heavy equipment, healthcare and medical, and hospitality and FF&E.