Shipping Car Parts from Wuhan to Denver via Ocean Freight

For moisture-sensitive automotive parts, Use inner poly bags with desiccant around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed automotive parts, but it is best that they are physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require dangerous goods documentation, depending on the type and quantity of fluid. Shippers should review whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with declared value coverage. Carrier default liability is usually limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and car tires above. Use edge protectors, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Required documentation typically includes a commercial invoice, packing list, bill of lading, and any necessary export permits. Additionally, an import declaration may be required upon arrival in the United States.

Yes, automotive parts must comply with U.S. safety and environmental regulations, including adherence to the Federal Motor Vehicle Safety Standards (FMVSS) and potential tariffs or import duties. Importers should verify compliance with the U.S. Customs and Border Protection (CBP) regulations.

Clients have shared that real-time updates on delays, a reduction in tracking time from 25–30 hours per week to 2–3 hours per week, more efficient management of many shipments, and the ability to quickly and efficiently update their own customers on project-based ocean freight shipments.

For your team, SAMMIE means 50% less time spent tracking shipments, immediate visibility, fewer shipment errors and missed handoffs, better alignment between purchasing, logistics, and finance, and lower overhead with fewer manual check-ins.

Inside the Smart Document Hub human help is one click away if your team needs additional support.