Shipping Vehicle Components from Wuhan to Vancouver via Ocean Freight

For moisture-sensitive Auto parts, select inner poly bags with desiccant around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed automotive parts, but They should be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require dangerous goods documentation, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with declared value coverage. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and car tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Required documentation includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance with Canadian regulations.

Yes, auto parts must comply with Canadian import regulations, including safety standards set by Transport Canada and may require specific certifications depending on the type of parts being imported.

SAMMIE blends historical lane performance, live vessel telemetry, port congestion trends, and weather overlays to calculate constantly updating ETAs that go beyond static carrier estimates.

Every client receives access to SAMMIE, where you can track each shipment in real time with predictive ETAs, milestone updates, and instant alerts in a single dashboard.

We support compliance with U.S. Customs & Border Protection (CBP), the FDA, USDA, DOT, and other regulatory bodies, and we maintain active certifications including C-TPAT and FMC.