Shipping Automotive Parts from Xiamen to Mira Loma via Ocean Freight

For moisture-sensitive automotive parts, select inner Moisture-barrier bags around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship vehicle tires with boxed Auto parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers often require Hazardous materials declarations, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules should be shipped with Full-value cargo insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed auto parts pallet loads, position the heaviest metal components at the bottom, with lighter boxes and Tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

When shipping auto parts via ocean freight, it's important to ensure that the parts are properly packaged to prevent damage during transit. This includes using appropriate cushioning materials and securing the parts in containers to avoid shifting. Additionally, it's advisable to comply with any specific handling requirements for hazardous materials if applicable, as some auto parts may fall under this category.

Required documentation for customs includes a commercial invoice detailing the value and description of the auto parts, a packing list, and a bill of lading. Additionally, an import declaration may be required by U.S. Customs and Border Protection, along with any necessary permits or certifications related to automotive parts.

Yes, you can. You can see our certifications and compliance credentials, including FMC license, DOT number, and C-TPAT partnership, in the Certifications section of our FAQs.

If you spot an issue, we act fast, and SAMMIE also flags duplicates or anomalies before invoices are sent, with your dedicated Client Success Officer available for clarification.

DNA’s Expert Date is the most accurate dynamic forecasts in the industry, using historical data, live vessel telemetry, weather, and port congestion overlays to go beyond basic status updates.