Shipping Auto Components from Yantian to Long Beach via Ocean Freight

For moisture-sensitive car parts, Use inner poly bags with desiccant around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You are allowed to ship Tires with boxed automotive parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers May require dangerous goods documentation, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules Are best shipped with declared value coverage. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed vehicle components pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and car tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

The required documentation typically includes a commercial invoice, packing list, bill of lading, and any necessary export licenses from China. Additionally, compliance with U.S. customs regulations may require a customs declaration and specific import permits for automotive parts.

Auto parts should be properly packaged to prevent damage during transit and to withstand the marine environment. Special attention should be given to securing parts to avoid movement within containers, and consideration for humidity control may be necessary to prevent corrosion.

Our company handles international shipping by ocean (FCL and LCL), air (standard and expedited), and domestic or cross-border ground freight (FTL, LTL, and intermodal).

Yes, your team can access all documents—bills of lading, invoices, customs forms, and arrival notices—in SAMMIE’s centralized, searchable document hub.

Yes, our team can schedule periodic performance reviews and account check-ins so you can review metrics and discuss needs or questions live.