Shipping Vehicle Parts from Yantian to Seattle via Ocean Freight

For moisture-sensitive car parts, select inner poly bags with desiccant around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You are allowed to ship vehicle tires with boxed automotive parts, but they must be physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers often require dangerous goods documentation, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules should be shipped with declared value coverage. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed vehicle components pallet loads, position the heaviest metal components at the bottom, with lighter boxes and car tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

When shipping auto parts via ocean freight from Yantian to Seattle, it is important to ensure that all parts are securely packaged to prevent damage during transit. Additionally, specialized handling may be required for sensitive components, such as electronic parts, to avoid exposure to moisture and salt.

Shipping auto parts from Yantian to Seattle requires compliance with U.S. Customs regulations, including proper documentation such as invoices, packing lists, and a Bill of Lading. Auto parts must also meet U.S. safety and environmental standards, and may be subject to inspections upon arrival.

Our team delivers live map tracking with milestone updates, 24/7 access via SAMMIE, centralized shipment documents, and real-time exception alerts so you always know where your freight is and what’s happening with it.

Our approach reduces customs delays and risk through in-house brokerage, a digital-first customs process with automation, SAMMIE’s ability to flag potential delays before they happen, and continuous communication from your Client Success Officer.

The ETAs we provide are AI-powered and based on real data, congestion, and vessel telemetry, whereas other forwarders often rely on static estimates copied from carrier schedules.