Shipping Automotives from Yokohama to Charlotte via Ocean Freight

For moisture-sensitive automotive parts, Use inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed car parts, but they must be physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Exporters should review whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

When shipping auto parts, it is crucial to ensure that they are securely packaged to prevent damage during transit. Additionally, it is recommended to use moisture-resistant materials as ocean freight can expose shipments to humidity and saltwater, which may affect the integrity of the automotive parts.

Regulatory requirements include compliance with U.S. Customs and Border Protection (CBP) regulations, which necessitate proper documentation such as a bill of lading, commercial invoice, and any necessary import permits. Furthermore, auto parts may need to meet specific safety and environmental regulations set by the U.S. Environmental Protection Agency (EPA) and the Department of Transportation (DOT).

DNA addresses risk and delays by using SAMMIE as a mission-critical platform with live data, predictive alerts, and exception management so importers can manage risk, reduce delays, and reclaim control.

Our platform provides smart, preemptive alerts about delays, reroutes, or exceptions so you are notified before you even ask.

Yes, DNA provides port-to-door service that covers customs and final-mile delivery.