Shipping Car Tires from Yokohama to Taipei via Ocean Freight

For moisture-sensitive automotive parts, choose inner poly bags with desiccant around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship car tires with boxed automotive parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers can require dangerous goods documentation, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules are typically shipped with declared value coverage. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and car tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Shipping auto parts from Yokohama to Taipei requires a commercial invoice, packing list, and a bill of lading. Additionally, customs declarations must be completed, and any necessary import permits for automotive parts should be obtained in accordance with Taiwanese regulations.

Seasonal considerations may include typhoon season, which typically runs from May to October. During this period, shipping routes may be affected by severe weather, potentially causing delays or requiring alternative routing for the transport of auto parts.

Typical tools only visualize carrier data, while SAMMIE is built on ecosystem data from third-party sources and DNA’s proprietary history, enabling predictive ETAs, intelligent alerts, and advanced automation powered by clean, validated data.

DNA provides international shipping by ocean (FCL and LCL), air (standard and expedited), and domestic or cross-border ground freight (FTL, LTL, and intermodal).

Yes, online access is available access all documents—bills of lading, invoices, customs forms, and arrival notices—in SAMMIE’s centralized, searchable document hub.