Shipping Tires from Zhanjiang to Lazaro Cardenas via Ocean Freight

For moisture-sensitive Auto parts, Use inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed car parts, but it is best that they are physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Shippers should review whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts, it is important to ensure that they are properly packaged to prevent damage during transit. Considerations include using appropriate cushioning materials, securing parts to prevent movement, and ensuring that all components are labeled correctly for easy identification. Additionally, compliance with international shipping regulations for hazardous materials, if applicable, should be observed.

Required documentation typically includes a commercial invoice, packing list, bill of lading, and any certificates of origin or compliance specific to automotive parts. It is also essential to check for any additional permits or certifications that may be needed for customs clearance in Mexico.

We reduce customs delays and risk through in-house brokerage, a digital-first customs process with automation, SAMMIE’s ability to flag potential delays before they happen, and continuous communication from your Client Success Officer.

Our ETAs are AI-powered and based on real data, congestion, and vessel telemetry, whereas other forwarders often rely on static estimates copied from carrier schedules.

Customers describe SAMMIE’s data as extremely accurate and reliable, especially compared to the inaccurate or outdated data they used before adopting the platform.