Shipping Car Parts from Zhongshan to Long Beach via Ocean Freight

For moisture-sensitive Auto parts, select inner poly bags with desiccant around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed automotive parts, but They should be physically separated and properly secured. Most carriers recommend palletizing boxed auto components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require dangerous goods documentation, depending on the type and quantity of fluid. You should review whether the product is classified as dangerous goods under IMDG and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with declared value coverage. Carrier default liability Is often limited and may not cover the full replacement cost of specialized auto parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and car tires above. Use Corner boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Required documentation includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance with U.S. regulations for automotive parts.

Yes, auto parts must comply with U.S. Customs and Border Protection regulations, including potential inspections and adherence to safety and environmental standards set by agencies such as the EPA and NHTSA.

SAMMIE sends smart, preemptive alerts about delays, reroutes, or exceptions so you are notified before you even ask.

Yes, we offer port-to-door service that covers customs and final-mile delivery.

Yes, we offer U.S. and Mexico cross-border coverage.