Shipping Vehicle Parts from Zhongshan to Port Said via Ocean Freight

For moisture-sensitive Auto parts, select inner sealed pouches around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed car parts, but They should be physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. You should review whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use Corner boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

When shipping auto parts via ocean freight, it is important to ensure that all parts are securely packaged to prevent damage during transit. Additionally, it is advisable to use moisture-resistant materials to protect against humidity, especially given the oceanic environment. Proper labeling and documentation are essential to facilitate customs clearance at both ports.

Regulatory requirements include compliance with Egyptian import regulations, which may involve obtaining necessary permits and ensuring that all auto parts meet local safety standards. Importers must also provide accurate documentation, including commercial invoices, packing lists, and certificates of origin, to facilitate customs clearance in Port Said.

We offer ocean freight (FCL and LCL), air freight, ground transportation (domestic and cross-border trucking), customs brokerage, and warehousing & distribution, all supported by our SAMMIE visibility platform and dedicated Client Success Officers.

We provide secure, strategically located warehousing for scalable storage and just-in-time fulfillment, with real-time inventory control and integrated distribution powered by SAMMIE’s insight and our responsive Client Success Officers.

We support seamless EDI/API connectivity tailored to your systems—including ERP, WMS, finance, and more—while many other forwarders depend on third-party platforms with limited integration and manual data entry.