Shipping Led Lights from Busan to Genoa via Ocean Freight

When transporting mixed loads of Construction materials such as lamps, Tools, and bulk Hardware, properly separate items by weight and fragility on each pallet. Place heavy, dense construction goods at the bottom, with lighter cartons of light fixtures on top, and apply corner boards, top sheets, and stretch wrap to stabilize the load. Prominently label pallets with handling instructions like “Fragile lighting” or “Heavy tools” so carriers Can handle them appropriately.

For light fixtures and LED lights, pack in Double-wall cartons with internal dividers or foam inserts so glass and lenses Do not touch each other. DNA recommends Wrapping each fixture in bubble wrap or foam sleeves, then positioning them in snug compartments. Clearly mark cartons as “Fragile – Lighting” and avoid stacking them under heavy building supplies on the same pallet.

Moisture-sensitive building products such as cement-based goods, metal Hardware, and electrical LED lights Should be Wrapped with moisture-barrier film and, where feasible, Combined with desiccant packs. Select enclosed equipment—like dry vans or sealed ocean containers—rather than open trucks, and try to avoid long outdoor dwell times at terminals. For export, evaluate container liners or dehumidifier units for high-humidity routes.

High-value power tools and branded Hardware usually require All-risk cargo insurance, especially when combined with fragile Lighting. DNA recommends Insuring shipments at full replacement value and maintaining serial numbers or SKU lists for premium Power tools. This documentation strengthens claim outcomes if cartons are lost, pilfered, or water-damaged.

Most standard electrical LED lights ship as general Construction goods, but it is important to Declare them with the correct HS codes and electrical specifications on your documentation. If Power tools with lithium batteries are included, DG regulations may be involved, requiring Special labeling, packing instructions, and sometimes carrier pre-approval. Check with your carrier or freight forwarder in advance to confirm any restrictions for combined loads of electrical Lighting and powered Tools.

Required documentation includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or conformity specific to building materials.

Seasonal weather patterns, such as typhoons in summer or heavy storms in winter, may impact ocean freight conditions, necessitating careful planning for potential delays or handling requirements.

DNA offers in-house customs brokerage that handles classification, documentation, and clearance across U.S. and global ports with accuracy and speed, supported by SAMMIE’s delay flagging and ongoing updates from your dedicated Client Success Officer.

Using DNA, you receive live map tracking with milestone updates and 24/7 access via SAMMIE, while other forwarders often provide only basic carrier links and manual updates that can be delayed or incomplete.

Our clients say that SAMMIE makes managing shipments simple, puts accurate real-time location, status, and ETAs at their fingertips, and significantly reduces the time and effort required to manage many shipments.