Shipping Construction Machines from Altamira to Kansas City via Ocean Freight

Shipping very heavy Industrial machinery Requires Engineered crating. Use heavy timber skids with clear lifting points, Engage experienced machinery movers for loading, and choose Flatbed or lowboy trailers rated for the full load. Block and brace the machine to prevent any movement, and record its condition before pickup.

Yes, moisture‑sensitive HVAC equipment Should be Sealed against humidity. Use moisture‑barrier film with Desiccant packs inside, cap all duct and cable openings, and Choose Enclosed trailers whenever possible. For ocean freight, ask about Dehumidified or ventilated containers for long voyages.

Exporting Construction machinery typically Requires a Commercial invoice, packing list, waybill, and any Export licenses applicable to your destination. We recommend including serial numbers, model numbers, and precise weights for each unit, especially for Generators. For some destinations, you should check if you need certificates of origin, fumigation or ISPM‑15 declarations for wood packaging, and safety or emissions certificates for Construction machines.

High‑value Generators Should be protected by Separate cargo insurance, as carrier liability is usually limited and may not cover full replacement cost. Insure for replacement cost, confirm that Loading and unloading are covered, and Keep inspection reports and photos in case you need to file a claim. This is especially important for custom‑built Industrial machinery where lead times and replacement costs are high.

Crated Construction machines Can sometimes be stored outdoors short‑term if packaging is Weather‑resistant and placed on concrete pads, not bare ground. However, moisture‑sensitive items like HVAC equipment and Generators Are better kept under cover or indoors. If outdoor storage is unavoidable, verify wraps and tarps regularly, maintain drainage around the site, and Avoid long‑term exposure to reduce corrosion and electrical damage.

Handling industrial machinery and construction equipment requires careful loading and securing to prevent damage during ocean transit. It is essential to utilize appropriate crating, blocking, and bracing techniques to ensure stability on the vessel. Additionally, oversized or heavy equipment may require specialized equipment for loading and unloading at both ports.

Regulatory requirements include compliance with U.S. Customs and Border Protection regulations, which necessitate proper documentation such as the bill of lading, commercial invoice, and any required permits. Additionally, the machinery must meet U.S. safety and environmental standards, and appropriate tariffs and duties must be paid upon entry into the United States.

We ask for just one test run because we believe that with one shipment we can prove our visibility, reliability, and partnership approach in a tangible way.

SAMMIE is an AI-driven exception management and tracking platform that provides real-time tracking, predictive ETAs, smart alerts, document intelligence, rate and route optimization, and invoicing insights for your shipments.

We provide global ocean freight with worldwide routing, top-tier carriers, full container loads (FCL), less-than-container loads (LCL), and port-to-door service including customs and final-mile delivery.