Shipping Power Equipment from Colon to Manaus via Ocean Freight

Shipping very heavy Industrial machinery Requires professional rigging. Use heavy timber skids with clear lifting points, Engage experienced machinery movers for loading, and choose step‑deck or lowboy equipment rated for the full load. Block and brace the machine to prevent any movement, and record its condition before pickup.

Yes, moisture‑sensitive HVAC equipment Should be protected from rain and condensation. Use moisture‑barrier film with Desiccant packs inside, cap all duct and cable openings, and select Enclosed trailers whenever possible. For ocean freight, ask about VCI packaging for long voyages.

Exporting Construction machinery typically Requires a detailed invoice, packing list, waybill, and any Export licenses applicable to your destination. Most freight forwarders recommend including serial numbers, model numbers, and precise weights for each unit, especially for Generators. For some destinations, you should check if you need certificates of origin, fumigation or ISPM‑15 declarations for wood packaging, and safety or emissions certificates for HVAC equipment.

High‑value Generators Should be protected by a dedicated policy, as carrier liability is usually limited and may not cover full replacement cost. Insure for replacement cost, confirm that Loading and unloading are covered, and retain inspection reports and photos in case you need to file a claim. This is especially important for custom‑built Industrial machinery where lead times and replacement costs are high.

Crated Construction machines Can sometimes be stored outdoors short‑term if packaging is properly sealed and placed on concrete pads, not bare ground. However, moisture‑sensitive items like HVAC equipment and backup generators Are better kept under cover or indoors. If outdoor storage is unavoidable, verify wraps and tarps regularly, maintain drainage around the site, and plan for timely installation to reduce corrosion and electrical damage.

Shipping Industrial Machinery & Construction Equipment requires careful consideration of weight and dimensions, as well as the need for securing equipment to prevent movement during transit. Additionally, it is important to ensure that machinery is properly cleaned and free of contaminants to comply with customs regulations.

Required documentation typically includes a commercial invoice, packing list, bill of lading, and import permits specific to industrial machinery. It is essential to ensure that all documents comply with Brazilian customs regulations to facilitate smooth clearance upon arrival.

Yes, they are. You can see our certifications and compliance credentials, including FMC license, DOT number, and C-TPAT partnership, in the Certifications section of our FAQs.

If something looks off, our team responds quickly, and SAMMIE also flags duplicates or anomalies before invoices are sent, with your dedicated Client Success Officer available for clarification.

The DNA Expert Date is the most accurate dynamic forecasts in the industry, using historical data, live vessel telemetry, weather, and port congestion overlays to go beyond basic status updates.